Pre Filter Alorair Cleanshield Merv-10 Moisture Meters Surfaces to be coated must

Surfaces to be coated must be free of dust

1 x 260mm Narrow Wand Relative Humidity Probe - RHP-NW-B

so do it over a surface you can rinse

Order as TCHECKW/CS

Pre Filter Alorair Cleanshield Merv-10 Moisture Meters Surfaces to be coated mustThis filter is the 1st stage pre filter used in the AlorAir Clean Shield HEPA 550 Air Scrubber. Features This MERV 10 Filter is made of synthetic fibre filter media. Effectively absorb dust, pollen, cotton wool, and other impurities in the air. Specification Dimension: 348mm 378 mm 20 mm Weight: 30 grams pc Changing the filters 1. Loosen the 4 locks that hold the filter board in place. 2. Slide out the filter panel board. 3. Remove the used filters