Lawson Pretreat Sprayer Nozzle/Spray Tip - OENA Style Type_g_Large Format Applicable for both industrial and

Applicable for both industrial and personal use

Automated printer maintenance system

The DK16A 14x16 clamshell press opens for full access to the lower bottom table

Toner based systems do not have this maintenance issue

Lawson Pretreat Sprayer Nozzle/Spray Tip - OENA Style Type_g_Large Format Applicable for both industrial andHere are some general principles to understand: If you have a Zoom XL or another air (pneumatic) pre treat sprayer: Set your Air Pressure to at least 50 psi. The amount of psi will effect the uniformity and amount of fluid deposit. You will determine the ideal pressure setting for your particular environment and type of printing through trial and error. Daily Purging of the System is critical to consistent spraying. The Nozzle Tip can start to spray