Pro+ Pipe And Tube Notcher Mild Steel Blades Guides mount to a standard

Guides mount to a standard 1/4" T-Slot found on most commercially available router table fences

NOTE* Additional Shipping Charges will Apply

Removable wheel covers for easier wheel change

THESE ARE ONLY RATED FOR 40 AMPS AND WORK BEST FROM 35 TO 40 AMPS AND 65 TO 70 PSI AIR thin sheet metal to 3/8"

Pro+ Pipe And Tube Notcher Mild Steel Blades Guides mount to a standardRound Tube Minimum Outside Diameter (OD): 1 2" (12. 7 mm) Maximum Outside Diamter (OD): 2" (50. 8 mm) Pipe Minimum Size: NPS 1 4 (DN 8) Maximum Size: NPS 1 1 2 (DN 35) Other Specifications Notch Angle: 0degrees 60degrees Offset Notching: Up to 1 2 the OD of your tube or pipe Minimum Chuck Size: 1 2" (12. 7 mm) Minimum Required Chuck to Table Height (for drill press use): 16" (407 mm) Arbor Thread Sizes: 1 2 20 and 5 8 18 (accepts both)