Amana Tool 77mm Long Brad Point Boring Bits Option:302051 - L/H 5.1mm Dia x 77mm Long x 10mm Shank Amana's coating is applied onto

Amana's coating is applied onto the bit at a temperature of 570° F

This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates

Cut that out of the equation with the Ram Board Multi-Cutter

Shallow design will also work well with European hinges

Amana Tool 77mm Long Brad Point Boring Bits Option:302051 - L/H 5.1mm Dia x 77mm Long x 10mm Shank Amana's coating is applied ontoIndustrial Brad Point Boring Bits are coated with a non stick coating for longer lasting cutting edge and tool life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Amana's coating is