Tork Craft | Carbon Steel Hole Saw 73mm Pony_Woodworker Front cover can be flipped

Front cover can be flipped for perimeter sanding work

Cutting width: 2

35mm shank (shaft) that will fit most small or large routers with the correct size collet

These clean marks then serve as a perfect guide for cutting mortises with a chisel

Tork Craft | Carbon Steel Hole Saw 73mm Pony_Woodworker Front cover can be flippedCarbon Steel Hole Saw The carbon steel hole saw is covered with a black oxide finish to prevent rust Holes can be quickly and efficiently drilled in wood, composite materials and plastic Maximum depth of cut is 19mm IMPORTANT: Do not use the carbon steel hole saws for cutting into metal or steel To use a hole saw, you will need the following accessories A portable drill or stationary drill with a 3 jaw chuck The correct mandrel and pilot drill for the