Tork Craft | Annular Hole Cutter HSS 55mm Broach Slugger Bit - Various Sizes 27mm Annular Hole Cutter HSS 55mm Broach Slugger Bit:64mm Dust & Splash Protection: IP

Dust & Splash Protection: IP 54

1 x T25 Security Key

Does not bond to polyethylene

The life expectancy and cutting performance of the blade will be reduced when fitted reversed

Tork Craft | Annular Hole Cutter HSS 55mm Broach Slugger Bit - Various Sizes 27mm Annular Hole Cutter HSS 55mm Broach Slugger Bit:64mm Dust & Splash Protection: IPAnnular Hole Cutter HSS 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these