Tork Craft | Annular Hole Cutter HSS 40 X 30mm Broach Slugger Bit Shipping_600 Overall Length 410mm

Overall Length 410mm

Cutting a plastic pipe to length

For best results gently rub with Ultra Fine Steel Wool (Grade 0000) between coats

precision-ground carbide teeth and a Teflon-coating ‘Perma-SHIELD protection’

Tork Craft | Annular Hole Cutter HSS 40 X 30mm Broach Slugger Bit Shipping_600 Overall Length 410mmAnnular Hole Cutter HSS 40 X 30mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these