Tork Craft | Annular Hole Cutter HSS 42 X 55mm Broach Slugger Bit Type_Shredders Easily applied with a brush

Easily applied with a brush or cloth

folding extension

It is a genuine 5 minute morticer which is acclaimed by locksmiths and builders alike

Featuring a strong magnetic tip

Tork Craft | Annular Hole Cutter HSS 42 X 55mm Broach Slugger Bit Type_Shredders Easily applied with a brushAnnular Hole Cutter HSS 42 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these